• What is the classification and working principle of the filling machine?

    According to the filling principle, the filling machine can be divided into atmospheric filling machine, pressure filling machine, liquid filling machine, oil filling machine, paste filling machine, sauce filling machine, granular slurry filling machine , Powder filling machine, vat water filling machine and vacuum filling machine. Atmospheric filling machine    is filling by the weight of the liquid under atmospheric pressure. This type of filling machine is divided into two types: timing filling and constant volume filling, which are only suitable for filling low-viscosity and gas-free liquids such as milk, liquor, mineral water, etc. Filling is carried out at higher than atmospheric pressure, and it can be divided into two types: one is the pressure in the liquid storage cylinder is equal to the pressure in the bottle, and the liquid flows into the bottle by its own weight. This is called equal pressure filling. ; The other is that the pressure in the liquid storage cylinder

    What types of filling machines are there and how are they divided?

    There are indeed many types of filling machines. When the classification is not very strict, we can call them according to the material. For example, we call the chili sauce filling machine for filling chili sauce, and we call the edible oil filling machine for filling edible oil. Installed. In addition, we have other classification methods Classified according to the principle of operation. There are flow meter type filling machine, plunger type filling machine, self-flow type filling machine and so on. Classified according to the degree of automation. There are semi-automatic filling machines, automatic filling machines, filling lines, etc. According to the material form classification. There are paste filling machines, liquid filling machines, powder filling machines and so on.

    What are the common faults of the belt of the capping machine?

    With regard to the three common faults and cause analysis of the belt of the capping machine, I hope that it can help everyone quickly find out the cause and make adjustments when encountering a belt fault, so that the belt can run better! One: the bottle is dumped 1) The center of the belt and the center of the capping wheel are not on the same straight line 2) The speed of the conveyor belt and the speed of the capping machine belt are not synchronized 3) The belt is too loose or the tightening torque is large 4) The upper and lower distance of the belt is too small 2: The cap is not tightened 1) The bottle goes too fast when screwing the cap 2) The belt tightening torque is too small or the rubbing wheel speed is too slow

    What is the belt of the capping machine?

    The working principle of the capping machine belt is: After the capped bottle body enters the capping machine continuously, it is clamped forward by the double-layer vertical timing belt, and the cap is gradually rubbed after three pairs of rubbing wheels rotating in the same direction. tight. According to the customer's bottle type, the height and width of the belt and the height and width of the rubbing wheel can be adjusted appropriately to achieve the ideal rubbing speed and stable effect! Moreover, the adjustment parts are equipped with visually controlled scales or scales, no spare parts are required when updating the bottle type or cap, and only a slight adjustment can meet the requirements! Mainly used in production equipment for small bottles! According to the degree of mobilization, there are fully automatic capping machines and semi-automatic capping machines; according to 5261 vacuum, it can be divided into vacuum screwing 4102 capping machine and 1653 vacuum

    本站使用百度智能門戶搭建 管理登錄